-
- Accessories, Adapters, Screws & Nuts
Kupo 1/4in-20 D-Ring Screws (Set of 5)
- The Kupo 1/4"-20 D-Ring Screws (Set of 5) is made with stainless steel. It can be hand tightened using the hinged D-ring or by using a screw driver. It's great for quick-release plates. The shaft is 10mm long in total. Ideal for quick-release plates or any 1/4"-20 thread compatible device. Hand tighten using the hinged D-ring or by using a…
- Read more
-
- Accessories, Adapters
Kupo 1/4in-20 Male to 1/4in-20 Male Thread Adapter
- This is a small adapter that converts a 1/4"-20 female thread into a 1/4"-20 male thread. Dual male stud with standard 1/4” 20 tripod thread. Converts a 1/4"-20 female thread into a 1/4"-20 male thread Handy to attach two female devices to each other with the adapter inbetween them
- Read more
-
- Accessories, Stand Accessories
Kupo 1/4in-20 Thread 3/8in Stud for Stand Top
- Easily screw the stud onto any top stand comes with 1/4"-20 threaded male. Keep any background crossbar with 3/8" mounting holes at each end mounted on the stand. A great way to convert your existing light stands into background holders and deal with run-and-gun setups and lighter backdrops. 1/4"-20 screw right onto the stand Keep any background crossbar with 3/8"…
- Read more
-
- Accessories, Camera Support, Grip
Kupo 10in Vacuum Suction Cup with Cheese Plate
- 10” pumping suction cup equipped with an aluminum cheese plate drilled with 3/8” (10mm) holes. Ideal for rigging cameras or lighting fixtures on cars or any smooth non-porous surface. A red-line indicator warns if there is any vacuum loss. Supplied with pad protector. 10" pumping suction cup made by rubber material with silicon Red-line indicator for warming vacuum loss Ideal…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 12ft x 12ft Butterfly Frame Kit
- The Kupo 12ft x 12ft Butterfly Frame is made of heavy-duty 30mm square section aluminum tubes which can be easily locked together and disassembled for storage and transportation. Ear type frame supporters are provided for mounting the butterfly frame on the stands allowing for a stable frame for silks, scrims, etc. This 12' x 12' Butterfly Frame Kit can also…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18”x 24” Open End Flag Frame – Single White Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18”x 24” Open End Flag Kit
- A complete lighting control system in one. This lighting control carry bag is made of rugged polyester fabric with a zippered closure and carrying handle making it a great solution for storage and transportation of flags. To cater for the needs of complete lighting control with flags, there are 6 varieties of flags including: single black net, double black net,…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18″x 24″ Full Frame Flag – Black Denim
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18″x 24″ Open End Flag Frame – Double Black Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18″x 24″ Open End Flag Frame – Double White Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18″x 24″ Open End Flag Frame – Quarter Silk
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Lighting Control, Stand Accessories
Kupo 18″x 24″ Open End Flag Frame – Single Black Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 18″x 24″ Open End Flag Frame – White Artificial Silk
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Adapters
Kupo 1in Conversion Adapter 1/4in-20 Female to 1/4in-20 Male (Set of 5)
- Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5). Convert any 1/4"-20 receiver to a male 1/4"-20 stud. It is 25.4mm long. Tightens securely into place using an allen key or hex key. Mount spigots tripod heads or anything with 1/4"-20 receiver in difficult places. Convert any 1/4'-20 receiver to a male 1/4"20 stud. Tightens securely into place using…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 2-1/2in Grip Head with Big Handle – Black
- The 2-1/2 Grip Head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have four different sized V shaped jaws to accept any accessory with a 5/8" 1/2", 3/8", or 1/4" mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The 2-1/2"…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 2-1/2in Grip Head with Big Handle – Silver
- The 2-1/2" Grip Head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have four different sized V shaped jaws to accept any accessory with a 5/8", 1/2", 3/8", or 1/4" mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The 2-1/2"…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 20ft x 20ft Butterfly Frame Kit
- The Kupo 20ft x 20ft Butterfly Frame is made of heavy-duty 30mm square section aluminum tubes which can be easily locked together and disassembled for storage and transportation. Stud type frame support and safety wire are provided for mounting the buttery frame on stands allowing for a stable frame for silks, scrims, etc. This is a 20' X 20' butterfly…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 20in Extension Grip Arm – Black
- The 20" Grip Arm with Big Handle is a 2 1/2" grip head mounted on the end of a 20" piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists of a pair of rotating aluminum discs attached to…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 20in Extension Grip Arm – Silver
- The 20" Grip Arm with Big Handle is a 2 1/2" grip head mounted on the end of a 20" piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists of a pair of rotating aluminum discs attached to…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Stand Accessories
Kupo 20in Extension Grip Arm with Baby Hex Pin – Black
- A Grip Arm (or Gobo Arm or Boom Arm) is for a C-Stand and can be used in conjunction with a 2 1/2" grip head. It features the arm with a hex baby pin which is suitable for mounting a lighting fixture or anything with a baby receiver. Oversize T handle for great torque Durable construction with a stainless steel…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Stand Accessories
Kupo 20in Extension Grip Arm with Baby Hex Pin – Silver
- A Grip Arm (or Gobo Arm or Boom Arm) is for a C-Stand and can be used in conjunction with a 2 1/2" grip head. It features the arm with a hex baby pin which is suitable for mounting a lighting fixture or anything with a baby receiver. Oversize T handle for great torque Durable construction with a stainless steel…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 24”x 36” Open End Flag Kit
- A complete lighting control system in one. This lighting control carry bag is made of rugged polyester fabric with a zippered closure and carrying handle making it a great solution for storage and transportation of flags. To cater for the needs of complete lighting control with flags, there are 6 varieties of flags including: single black net, double black net,…
- Read more
-
- Accessories, Lighting Control, Stand Accessories
Kupo 24″x 36″ Full Frame Flag – Black Denim
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Lighting Control, Stand Accessories
Kupo 24″x 36″ Open End Flag Frame – Double Black Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 24″x 36″ Open End Flag Frame – Double White Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 24″x 36″ Open End Flag Frame – Quarter Silk
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Lighting Control, Stand Accessories
Kupo 24″x 36″ Open End Flag Frame – Single Black Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 24″x 36″ Open End Flag Frame – Single White Bobbin Net
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 24″x 36″ Open End Flag Frame – White Artificial Silk
- Designed primarily to control natural or artificial light on indoor or outdoor shoots. Flags are square or rectangular steel frames stitched with fabric and come with a 9.5mm diameter mounting pin welded on the steel frame for connecting a grip head (or gobo). Flags are typically used with C-Stands so you can position them into place to create contrast, change…
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M10 Screw and Washer
- A solid steel 28mm TV spigot tapped for an M10 screw with washer. Ideal for mounting lighting fixtures directly on stands with a 28mm receiver. Chrome plated. Ideal for mounting lighting fixtures directly on stands or any TV clamps with 28mm receiver 28mm steel spigot M10 Hex screw with washer Length: 4.9 inches (125.3mm) Additional hole for safety pin
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M10 Thread
- A 28mm steel spigot with M10 thread and wing nut. Allows the spigot to be attached to a lighting yoke then fits into a standard lighting stand with a 28mm receiver. Allows the spigot to be attached to a lighting yoke 28mm steel spigot M10 thread with wing nut Length: 5.5 inches (139.9mm) Chrome plated
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M12 Thread
- A 28mm steel spigot with M12 thread and wing nut. Allows the spigot to be attached to a lighting yoke then fits into a standard lighting stand with a 28mm receiver. Allows the spigot to be attached to a lighting yoke 28mm steel spigot M12 thread with wing nut Length: 5.5 inches (139.9mm) Chrome plated
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with Round Plate and M10 Thread
- A 28mm steel spigot with a 12cm round mounting plate. Fits into a standard lighting stand or it can convert a 28mm receiver to an M10 thread with wing nut. Chrome plated. Fits into standard lighting stands or it can convert a 28mm receiver to an M10 thread with wing nut 28mm steel spigot M10 thread with wing nut Length:…
- Read more
-
- Accessories, Arri Supports & Mounting Solutions, Clamps & Couplers, Couplers, Grip, Other Accessories
Kupo 2in Half-Coupler for Skypanel PSU Mounting
- Aluminum made 2" coupler comes with a CNC aluminum plate which allows the Arri PSU Rail Mount Adapter to be effortlessly slid on and secured. It is a great solution for mounting the Power Supply Unit to a standard 2” truss or pipe. Ideal solution for mounting an Arri SkyPanel PSU to a standard 2” truss or pipe CNC aluminum…
- Read more
-
- Accessories, Adapters
Kupo 3-Way Mount Baby Adapter 5/8″ Receiver to 3/8″-16 Male
- The Kupo 3-Way Mount Baby Adapter is a versatile steel adapter with a black coating designed to securely mount a flash, light, or camera with 3/8"-16 female threads onto a 5/8" (16mm) light stand. The locking adapter allows for both vertical and horizontal mounting options. In addition, it features an oblique hole design, providing an additional 35-degree tilt to eliminate…
- Read more
-
- Accessories, Adapters
Kupo 3.5″ Extra Long 5/8″ Baby Stud with 3/8”-16 Male Thread
- This adapter is a 3.5” long 5/8” baby stud with 3/8”-16 male thread 25.4mm in length. It can be used with a grip head or convi clamp and attached to any accessory with female 3/8" threads, such as an articulating arm. In addition, the male threads can be mounted to a clamp or another piece of grip gear, while the…
- Read more
-
- Accessories, Adapters
Kupo 3.5in Long 5/8in Baby Stud with 1/4in-20 Male
- The Kupo 3.5" Long 5/8" Baby Stud w/ 1/4"-20M holds a small light monitor or can be used to mount anything that has a 1/4"-20 female thread. It can be used with a grip head on its own. It can be used with a grip head and grip arm combination for mounting options almost anywhere. It can be inserted into…
- Read more
-
- Accessories, Adapters
Kupo 3.5in Long 5/8in Baby Stud with 3/8in-16 Male Thread
- The Kupo 3.5" Long 5/8" Baby Stud w/ 3/8"-16M holds a small light monitor or can be used to mount anything that has a 3/8"-16 female thread. It can be used with a grip head on its own. It can be used with a grip head and grip arm combination for mounting options almost anywhere. It can be inserted into…
- Read more
-
- Accessories, Arms, Other Accessories, Rocks Arms
Kupo 3/8in-16 Male Tip for Rocks Arm
- Adding to the versatility of the popular Kupo 10” and 11” Rocks Arms are a series of interchangeable accessories. The Kupo 3/8in-16 Male Tip for Rocks Arm is an interchangeable stainless steel 3/8”-16 male tip that can be mounted on each end of the arms to make it compatible with equipment that come with 3/8”-16 female threads. Innovative modular system…
- Read more
-
- Accessories, Adapters
Kupo 3/8in-16 Male to 1/4in-20 Female Adapter
- This is a small adapter that converts a 3/8"-16 male thread to a 1/4"-20 female thread. It is made from brass. Converts a 1/4"-20 female thread into a 3/8"-16 male thread. Solid brass Great for size conversions on set Inexpensive and lightweight
- Read more
-
- Accessories, Adapters
Kupo 3/8in-16 Male to 1/4in-20 Male Thread Adapter
- This is a small adapter that converts a 3/8"-16 female thread into a 1/4"-20 male thread. Dual male stud with 3/8’’ to 1/4’’ thread adapter Converts a 3/8"-16" female thread into a 1/4"-20 male thread Handy to attach two female devices to each other with the adapter inbetween them
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 3in Pump Suction Cup with 1/4in-20 Thread
- The Kupo 3in Suction Cup is expertly designed for mounting in tight spaces where larger suction cups can't reach. It provides a secure, temporary solution for attaching small lights, cameras, and accessories to smooth, nonporous surfaces such as windows, mirrors, automobiles, boats and more. With a 1/4in-20 thread and 5/8in length, this suction cup is perfect for mounting lightweight video…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 3in Pump Suction Cup with 5/8in (16mm) Baby Pin
- The Kupo 3in Suction Cup is expertly designed for mounting in tight spaces where larger suction cups can't reach. It provides a secure, temporary solution for attaching small lights, cameras, and accessories to smooth, nonporous surfaces such as windows, mirrors, automobiles, boats and more. Equipped with a fixed 5/8" (16mm) baby pin, this suction cup is perfect for mounting lightweight…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 4.5in Metal Suction Cup with 3/8in-16 Thread x 5/8in Length
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 4.5in pump suction cup comes with a 3/8in-16 thread x 5/8in length stud for use with ballhead camera mounts. Provides a great mounting solution…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 40in Extension Grip Arm – Black
- The 40" Grip Arm with Big Handle is a 2 1/2" grip head mounted on the end of a 40 piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists of a pair of rotating aluminum discs attached to…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 40in Extension Grip Arm – Silver
- The 40" Grip Arm with Big Handle is a 2 1/2" grip head mounted on the end of a 40 piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists of a pair of rotating aluminum discs attached to…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 40in Extension Grip Arm with Baby Hex Pin – Black
- At the end of the 40" grip arm you will find a baby hex pin with six milled flat surfaces. Allows mounting the light fixtures or accessories on the end of the grip arm like a mini boom. They won't rotate due to the set-screw of that fixture or accessory locking onto one of the sides of the hex pin.…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Lighting Control, Stand Accessories
Kupo 40in Extension Grip Arm with Baby Hex Pin – Silver
- A 40" grip arm with a baby hex pin at the end with six milled flat surfaces. Now you can mount your light fixtures or accessories on the end of your grip arm like a mini boom. They won't rotate due to the set-screw of that fixture or accessory locking onto one of the sides of the hex pin. The…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Stand Accessories
Kupo 40in Super Grip Arm with Swivel Grip Finger
- The Kupo Super Grip Arm when coupled with a Kupo Grip Head provides an excellent solution for precise placement of lights when needing to work over your subject or in awkward and tight positions. The 40" steel extension arm is equipped with a Super Grip Finger 5/8" which acts as a swiveling pin on a ball joint. All axis lock…
- Read more
-
- Accessories, Adapters
Kupo 5/8” Adapter For 3/8” Female to 3/8” Male
- This aluminum 5/8’’ (16mm) adapter, is 2.7 inches (70mm) in length, and has 3/8”-16 female threads in one end and one 3/8’’-16 male to 3/8’’-16 male adapter on the other end. Great for connecting to any equipment that comes with 5/8’’ (16mm) receiver, 3/8’’-16 threaded male or 3/8’’-16 thread female. Connect to equipment with 5/8’’ (16mm) receiver, 3/8’’-16 threaded male…
- Read more
-
- Accessories, Adapters
Kupo 5/8” Stud with 3/8”-16 Female Thread
- This 3.5” long 5/8” baby stud has a 3/8"-16 female thread which is designed to mount a stud on a tripod, suction cup or anything with a 3/8”-16 thread. 3.5” long 5/8” baby stud with 3/8”-16 female thread Designed to mount a stud on a tripod, suction cups, or anything with 3/8"-16 thread Knurled neck Lightweight aluminum Length: 3.5in (90mm)
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Male Adapter (3/8in)
- Steel Made 5/8" (16mm) Adapter with 3/8’’-16 thread female. 5/8" (16mm) pin 3/8" -16 female thread at the end Knurled neck for maximum friction Steel made
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Male Adapter (M10)
- Steel Made 5/8" (16mm) Adapter with tapped M10 thread female. 5/8"(16mm) Stud Chrome plated Steel M10 Thread Female Length: 2.00" / 51.0mm
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Receiver with 1/4in-20 Thread
- This adapter consists of a baby receiver with a 1/4"-20 male thread attached to the top of it that can be mounted on any baby stud with a set-screw and knob to lock it firmly in place. It can be used to quickly mount a hot shoe flash with a Hot Shoe Adapter (KG006711), or a field monitor onto the…
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Receiver with 3/8in-16 Thread
- This adapter consists of a baby receiver with a 3/8"-16 male thread attached to the top of it that can be mounted on any baby stud with a set-screw and knob to lock it firmly in place. It can be used to quickly mount a hot shoe flash with a Hot Shoe Adapter (KG006711), or a field monitor onto the…
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Stud with 1/4in-20 Female
- This is a small adapter that converts a 1/4"-20 male thread into a 5/8" Baby Stud. 5/8’’ baby stud with 1/4’’- 20 female thread Designed to mount a stud on a tripod or anything with a 1/4” - 20 thread. Converts a 1/4"-20 male thread into a 5/8" Baby Stud Inexpensive and lightweight Length: 3.5" (88.9mm) long
- Read more
-
- Accessories, Camera Support, Grip
Kupo 6.0in x 11.5in x 3/8in Rectangle Cheese Plate
- Constructed from a CNC made aluminum plate with holes as a multipurpose utility bracket for various film related accessories. Specially design for mounting related accessories to cameras, monitors and lighting. It comes with the industry standard 3/8” holes, spaced every 1”. The four corners are counter-sunk 82 degrees on one side. CNC machining aluminum plate for various film related accessories…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 6ft x 6ft Butterfly Frame Kit
- The Kupo 6ft x 6ft Butterfly Frame is made of heavy-duty 30mm square section aluminum tubes which can be easily locked together and disassembled for storage and transportation. Ear type frame supporters are provided for mounting the butterfly frame on the stands allowing for a stable frame for silks, scrims, etc. Kit includes: 4 x 6ft Square Tubes - Female…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with 13.5in Support Arm
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 6in pumping suction cup features a fixed 2in (51mm) aluminum tube with a 13.5in (34.5cm) support arm which offers excellent mounting support options such…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with 3/8in-16 Thread
- Kupo's Metal Pump Suction Cups offer a temporary mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 6in pumping suction cup with its mounting plate and 3/8in-16 thread features an metal pump specifically designed to enhance suction power and durability. A red-line indicator…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with 5/8in Baby Receiver
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 6in pump suction cup comes with a fixed 5/8in baby receiver. Features a metal pump specifically designed to enhance suction power and durability as…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with 5/8in Swivel Baby Pin
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 6in pumping suction cup features a swivel baby pin which is fixed onto the suction cup. It features an aluminum pump specifically designed to…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with 5/8in Swivel Baby Receiver
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 6in pump suction cup comes with a swivel 5/8in baby receiver. Features a metal pump specifically designed to enhance suction power and durability as…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with Detachable 5/8in Swiveling Baby Adapter
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. They are great for mounting small lights, cameras, grip gear, and accessories to windows, mirrors, automobiles, boats and more. This 6in pumping suction cup features a 5/8in swivel baby pin which is also detachable from the the suction cup. It features a metal pump…
- Read more
-
- Accessories, Camera Support, Grip, Other Accessories, Pump Suction Cups
Kupo 6in Metal Pump Suction Cup with Swivel Coupler for 2in Pipe
- Kupo's Metal Pump Suction Cups offer a temporary solid light mounting solution on smooth, nonporous surfaces. This Kupo 6in pump suction cup comes with a swivel coupler for a 2in pipe and is primary designed for vehicle rigging. The T-handle on the coupler allows to tighten easily and conveniently. Capable of supporting up to 44lbs (20 kg), this suction cup…
- Read more
-
- Accessories, Camera Markers
Kupo 6in Sausage Camera Marker
- Traditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on the ground and can damage the surface such as trying to remove it from a roll of seamless paper, or leave unwanted glue residue behind. The Sausage Camera Marker features 1000 denier nylon construction for strength and…
- Read more
-
- Accessories, Camera Markers
Kupo 6x8in Camera T Marker
- Traditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on the ground and can damage the surface such as trying to remove it from a roll of seamless paper, or leave unwanted glue residue behind. The Camera T Marker features 1000 denier nylon construction for strength and…
- Read more
-
- Accessories, Camera Support, Grip
Kupo 7.5in x 10in x 3/8in Rectangle Cheese Plate
- Constructed from a CNC made aluminum plate with holes as a multipurpose utility bracket for various film related accessories. Specially design for mounting related accessories to cameras, monitors and lighting. It comes with the industry standard 3/8” holes, spaced every 1”. The four corners are counter-sunk 82 degrees on one side. CNC machining aluminum plate for various film related accessories…
- Read more
-
- Accessories, Other Accessories, Stand Accessories, Stands, Steadicam Stands
Kupo 8″ Pneumatic Wheel Set with Square Speed Adapter (Set of 3)
- This rugged 8" wheel set is for outdoor use and is available for the regular Steadicam Stand (KS101711), the Kupo Master Cine Stand (KS500112), the Kupo Master High Cine Stand (KS500412), and the Kupo Junior Boom Stand (KS501311). Rugged wheel set for outdoor use Availabe for the Kupo Steadicam Stand (KS101711), as well as the Kupo Master Cine Stand (KS500112),…
- Read more
-
- Accessories, Grip, Lighting Control, Stand Accessories
Kupo 8ft x 8ft Butterfly Frame Kit
- The Kupo 8ft x 8ft Butterfly Frame is made of heavy-duty 30mm square section aluminum tubes which can be easily locked together and disassembled for storage and transportation. Ear type frame supporters are provided for mounting the butterfly frame on the stands allowing for a stable frame for silks, scrims, etc. This 8' x 8' Butterfly Frame Kit can also…
- Read more
-
- Accessories, Adapters
KUPO Adapter For Thread 3/8”-16 To 1/4”-20 (Set of 5)
- Used to mount any accessory with a female 3/8"-16 threaded socket onto a 1/4"-20 male screw. (set of 5) Constructed from Steel Designed to Mount any Accessory with a Female 3/8”- 16 Threaded Socket onto a 1/4”- 20 Male Screw. Set of 5
- Read more
-
- Accessories, Adapters
Kupo Adapter Stud to 3/8in-16 Thread
- This is an adapter for the Convi Clamp System. It is a solid brass round 5/8" adapter stud with 3/8''-16M. Solid brass adapter 5/8"'' adapter stud with 3/8''-16M. Knurled pin
- Read more
-
- Accessories, Adapters
KUPO Adjustable Cold Shoe Mount
- The Kupo Hot Shoe Adapter is an all-metal micro clamp designed specifically for off-camera flashes. It comes equipped with a variable tension knob that locks securely around any flashes foot for a snug fit. The bottom of the adapter is tapped with a 1/4"-20 thread for easy mounting. With the popularity of off-camera TTL this little accessory will give you…
- Read more
-
- Accessories, Assorted Clamps, Clamps & Couplers, Gaffer Grip, Other Accessories
Kupo Adjustable Gaffer Grip
- The Gaffer Grips are quick mount multi-purpose clamps that will grab on most surfaces flat or round. They reinvent the standard spring clamp by adding strength and versatility. The Adjustable Gaffer Grip has one fixed baby 5/8" (16mm) stud and one reversible baby 5/8" stud with both 1/4"- 20 and 3/8"-16 threads on either side. The reversible stud is mounted…
- Read more
-
- Accessories, Arms, Side Arms, Stand Accessories
Kupo Adjustable Junior Side Arm 16in
- Kupo Adjustable Junior Side Arm 16" designed to offset a large light from a heavy duty stand. Uses the patented Kupo quick release clamp and can mount on tubes from 25-50mm Designed for offsetting a boom arm or large lighting fixture from a heavy duty stand. Features an adjustable quick release coupler that mounts on tube sizes from 25 -…
- Read more
-
- Accessories, Arms, Side Arms, Stand Accessories
Kupo Adjustable Twin Baby Side Arm 15in
- Kupo Adjustable Twin Baby Side Arm 15" designed to off set a light from a stand. Uses the patented Kupo quick release clamp and can mount on tubes from 25-50mm. Designed for offsetting lighting fixtures or accessories with twin baby (16 mm) pins from a stand. Features an adjustable quick release coupler which makes mounting on tube sizes from 25…
- Read more
-
- Accessories, Alli-Spring Clamps, Clamps & Couplers, Grip, Lighting Control, Other Accessories
Kupo Alli Clamp – Black
- The Alli Clamp is an all-purpose steel spring clamp with three attachment methods: a spring tension clamp, a 5/8" female socket and a Baby 5/8" (16mm) stud. The jaw packs quite a bite and opens from 0.2"-1.6" (5-40mm). This is the perfect accessory to hold a fill card or flag. Has a black finish. Steel spring Clamp 3 attachment methods:…
- Read more
-
- Accessories, Alli-Spring Clamps, Clamps & Couplers, Grip, Lighting Control, Other Accessories
Kupo Alli Clamp – Silver
- The Alli Clamp is an all-purpose steel spring clamp with three attachment methods: a spring tension clamp, a 5/8" female socket and a baby 5/8" (16mm) stud. The jaw packs quite a bite and opens from 0.2"-1.6" (5-40mm). This is the perfect accessory to hold a fill card or flag. Has a silver finish. Steel spring Clamp 3 attachment methods:…
- Read more
-
- Accessories, Other Accessories
Kupo Aluminum Director Chair
- An ideal and professional chair for studio, backstage or location. Made with folding lightweight aluminum and equipped with carry straps, this director chair is easy for storage and transportation. High denier and heavy-duty fabric with a padded back, seat, and arm rests keeps your seating comfortable and safe. Foldable tray table and pocket pouches on two flanks provide the greatest…
- Read more
-
- Accessories, Arms, Offset Arms, Stand Accessories
Kupo Baby 5/8in (16mm) Offset Arm
- This 15" (38cm) arm consists of a baby receiver on one side and two opposing baby studs on the other. It is used to position a light fixture or accessory away from the light stand. With two baby pins and one baby receiver, it mounts on a baby stand where a light cannot be placed as close as desired to…
- Read more
-
- Accessories, Arms, Side Arms, Stand Accessories
Kupo Baby 5/8in (16mm) Side Arm
- This arm consists of a heavy-duty clamp on one side and opposing double baby (5/8" - 16mm) pins on the other. It can be mounted quickly to the riser section of a light stand at any height to accept a light fixture or any accessory with a baby receiver. Fits tubes with diameters of 2" (51mm) with a total length…
- Read more
-
- Accessories, Arms, Offset Arms, Stand Accessories
Kupo Baby Adjustable Offset Arm 19-28in – Black
- The Baby Adjustable Offset Arm extends from 19"-28." Mounts on to most stands with a 5/8"-16mm mount. Two baby spigots allow for easy attaching of lights. Used mostly with C-Stands and allows for light being offset from the stand. Meant to support lights with a baby receiver Offset is adjustable from 19-28" and can hold lights up to 15lbs /6.8kg…
- Read more
-
- Accessories, Adapters
Kupo Baby Ball Head Adapter
- Since most grip gear and lighting equipment uses a baby 5/8"(16mm) spigot or a junior mount 28mm (1-1/8) receiver, this accessory adds extra versatility to your gear. Complete with 3 set screws to securely lock the head. Base diameter size is 44mm. The compact size and lightweight aluminum makes it ideal for traveling
- Read more
-
- Accessories, Adapters, Stand Accessories
Kupo Baby Drop Ceiling Adapter 5/8in (16mm) Stud
- The drop ceiling mount (also commonly called a scissor mount) attaches to an intersection in the metal grid that supports the tiles. This adapter is perfect for trying to find a suitable mounting point on drop ceilings. A must have accessory for shooting in office buildings. This is the male version of this adapter and features a 5/8" baby stud…
- Read more
-
- Accessories, Arms, C-Stands & C-Stand Accessories, Other Arms, Stand Accessories, Stands
Kupo Baby Triple Header
- The handy adapter allows you to mount multiple light fixtures or accessories onto a single light stand. Features five baby studs with embossed necks welded onto sturdy steel and offset for mounting five lights. Can be mounted on the stand top of a baby stud (16mm) or fit into a junior receiver (28mm). Allows multiple light fixtures or accessories to…
- Read more
-
- Accessories, Adapters
Kupo Bagua Multi Flash Bracket
- The Kupo Bagua Multi-Flash bracket is a palm sized, lightweight, black anodized, 6061 aluminum bracket with eight speedlight mounting locations. The bracket will accommodate four speedlights on it's own or up to eight speedlights with some optional Extension Flash Adapter Set. Up to eight flashes with Extension Flash Adapters or four without. Dual umbrella holes Four softbox rod holes 1/4"-20…
- Read more
-
- Accessories, Adapters
Kupo Ball Race Followspot Spigot with M10 Thread
- Use this 28mm rotating spigot to make a lighting fixture into a followspot. Smooth panning action is assured by roller bearings which allows the user to pan gently without sudden movements when moving a spotlight. A locking knob controls the position. The 28mm spigot also comes with an M10 screw attached Used to make a lighting fixture into a followspot…
- Read more
-
- Accessories, Adapters
Kupo Ball Race Followspot Spigot with M12 Thread
- Use this 28mm rotating spigot to make a lighting fixture into a followspot. Smooth panning action is assured by roller bearings which allows the user to pan gently without sudden movements when moving a spotlight. A locking knob controls the position and this rotating 28mm spigot also comes with an M12 screw attached. Used to make a lighting fixture into…
- Read more
-
- Accessories, Adapters
Kupo Bracket for Vagabond Mini Lithium Portable Power Pack
- The Kupo Bracket for Vagabond Mini Lithium Portable Power Pack is an excellent solution for holding and mounting a Vagabond mini portable power pack. The welded hex stud is designed to fit into a Convi Clamp receiver or with a Kupo 3 way and 4 way clamp. You can mount the Vagabond with a single 1/4"-20 screw to the bracket.…
- Read more
-
- Accessories, Camera Support, Grip
Kupo Camera Mountable Universal Smartphone Holder
- The spring-loaded Smartphone holder can hold any device up to 3”(76mm) wide. It comes with a 5-inch long articulating arm for mounting small devices above camera and allows photographers to keep the attention of children, pets, and other subjects for effective shooting. Also an ideal teleprompter display screen for those users recording videos by themselves. Meanwhile, a small monitor is…
- Read more
-
- Accessories, Camera Support, Grip
Kupo Camera Support Adapter
- Kupo aluminum made Camera Support Adapter provides a great supporting solution for a camera with built-in hot shoe. It features a 5.9" length 5/8’’ (16mm) baby stud which offers ample space for mounting two grip heads to connect with extra supporting rods. The ergonomic knurled knob design also makes it quick and easy to firmly tighten this adapter on the…
- Read more
-
- Accessories, Other Accessories
Kupo Camera USB Port Protector
- Molded hook-and-loop Velcro tie with a detachable plastic clip which ensures the plug stays in and the USB port is protected from damage when doing tethered shooting. Ideal for ensuring the plug stays in and USB port is protected from damage Size: 8mm (Width) x 100mm (Length) Molded precise hook- and- loop velcro Clip is detachable Lightweight and portable
- Read more
-
- Accessories, Camera Support, Grip
Kupo Car Rig Shot Kit
- Kupo's Car Rig Shot Kit is designed for car photographers for the most effective way to rig shot for capturing a car in motion and blur effects. Designed for photographic or video applications from a DSLR or Mirrorless Camera, not only is a sense of speed achieved, but the interesting angles that would be nearly impossible in panning or tracking…
- Read more
-
- Accessories, Other Accessories
KUPO Cloth Spike Tape 15 Yard (L) X 24mm (W) (Yellow)
- Highly visible fluorescent colors with matte finish for various applications including audio/visual, television, photography, theatrical and motion picture industries. It sets clearly visible marks for actors, crew, musicians, and camera operators. It is also feasible for use in color-coding, labeling and marking. Easily manual tearing and durable. This multi-purpose tape offers excellent holding power, high tensile strength, and will be…
- Read more
-
- Accessories, Adapters
Kupo Double Baby Receiver Adapter
- This adapter allows you to join two baby studs together. Includes 5/8" (16 mm) receiver. Made of chrome plated steel. 5/8" (16mm) Receiver Chrome plated steel Joins two baby studs together
- Read more
-
- Accessories, Adapters
Kupo Double Female Adapter – 5/8”
- This is an aluminum female to female adapter that is used to convert a 5/8" male light stand top to a 17mm female socket. It can also be used to make a 17mm female attachment from a 16mm spigot. Converts 5/8" male light stand top to a 17mm female socket Female adapter 16mm-17mm Made of lightweight aluminum Makes a 17mm…
- Read more
-
- Accessories, Grip, Grip Arm & Grip Heads, Stand Accessories
Kupo Double Gag Grip Head
- The Double Gag Grip Head is two sets of gripheads discs mounted on a steel plate with a 10mm diameter rod for 5.3" / 135mm length. It allows you to easily mount two light control frames into a single grip head. Two sets of gripheads for flexibility 10mm diameter Easily mount two light control frames Limited two-year warranty
- Read more
-
- Accessories, Clamps & Couplers, Super Convi Clamp System
Kupo Double-Ended Spigot
- Solid brass spigot features a 5/8" (16 mm) baby at one end allowing it to fit into the 5/8" receiver of a Super Convi Clamp or any piece of gear with a 5/8"” receiver, providing compatibility with cameras or accessories with a 1/4” - 20 threads at the other. Made of solid brass Baby pin at one end allows to…
- Read more
-
- Accessories, Assorted Clamps, Clamps & Couplers, Grip, Lighting Control, Stand Accessories
Kupo Duck Bill Clamp
- The Duck Bill Clamp is great for holding items such as foamcore, reflector boards, flags, and bounce cards. The quick set-up clamp allows for clamping onto flat surfaces quickly. Features a 7" Duckbill Plate Metal Jaw and clamps flat items up to 4.5" thick. The steel baby stud welded on the clamp has an embossed neck design to be firmly fixed…
- Read more
