-
- Accessories, Adapters, Screws & Nuts
Kupo 1/4in-20 D-Ring Screws (Set of 5)
- The Kupo 1/4"-20 D-Ring Screws (Set of 5) is made with stainless steel. It can be hand tightened using the hinged D-ring or by using a screw driver. It's great for quick-release plates. The shaft is 10mm long in total. Ideal for quick-release plates or any 1/4"-20 thread compatible device. Hand tighten using the hinged D-ring or by using a…
- Read more
-
- Accessories, Adapters
Kupo 1/4in-20 Male to 1/4in-20 Male Thread Adapter
- This is a small adapter that converts a 1/4"-20 female thread into a 1/4"-20 male thread. Dual male stud with standard 1/4” 20 tripod thread. Converts a 1/4"-20 female thread into a 1/4"-20 male thread Handy to attach two female devices to each other with the adapter inbetween them
- Read more
-
- Accessories, Adapters
Kupo 1in Conversion Adapter 1/4in-20 Female to 1/4in-20 Male (Set of 5)
- Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5). Convert any 1/4"-20 receiver to a male 1/4"-20 stud. It is 25.4mm long. Tightens securely into place using an allen key or hex key. Mount spigots tripod heads or anything with 1/4"-20 receiver in difficult places. Convert any 1/4'-20 receiver to a male 1/4"20 stud. Tightens securely into place using…
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M10 Screw and Washer
- A solid steel 28mm TV spigot tapped for an M10 screw with washer. Ideal for mounting lighting fixtures directly on stands with a 28mm receiver. Chrome plated. Ideal for mounting lighting fixtures directly on stands or any TV clamps with 28mm receiver 28mm steel spigot M10 Hex screw with washer Length: 4.9 inches (125.3mm) Additional hole for safety pin
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M10 Thread
- A 28mm steel spigot with M10 thread and wing nut. Allows the spigot to be attached to a lighting yoke then fits into a standard lighting stand with a 28mm receiver. Allows the spigot to be attached to a lighting yoke 28mm steel spigot M10 thread with wing nut Length: 5.5 inches (139.9mm) Chrome plated
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M12 Thread
- A 28mm steel spigot with M12 thread and wing nut. Allows the spigot to be attached to a lighting yoke then fits into a standard lighting stand with a 28mm receiver. Allows the spigot to be attached to a lighting yoke 28mm steel spigot M12 thread with wing nut Length: 5.5 inches (139.9mm) Chrome plated
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with Round Plate and M10 Thread
- A 28mm steel spigot with a 12cm round mounting plate. Fits into a standard lighting stand or it can convert a 28mm receiver to an M10 thread with wing nut. Chrome plated. Fits into standard lighting stands or it can convert a 28mm receiver to an M10 thread with wing nut 28mm steel spigot M10 thread with wing nut Length:…
- Read more
-
- Accessories, Adapters
Kupo 3-Way Mount Baby Adapter 5/8″ Receiver to 3/8″-16 Male
- The Kupo 3-Way Mount Baby Adapter is a versatile steel adapter with a black coating designed to securely mount a flash, light, or camera with 3/8"-16 female threads onto a 5/8" (16mm) light stand. The locking adapter allows for both vertical and horizontal mounting options. In addition, it features an oblique hole design, providing an additional 35-degree tilt to eliminate…
- Read more
-
- Accessories, Adapters
Kupo 3.5″ Extra Long 5/8″ Baby Stud with 3/8”-16 Male Thread
- This adapter is a 3.5” long 5/8” baby stud with 3/8”-16 male thread 25.4mm in length. It can be used with a grip head or convi clamp and attached to any accessory with female 3/8" threads, such as an articulating arm. In addition, the male threads can be mounted to a clamp or another piece of grip gear, while the…
- Read more
-
- Accessories, Adapters
Kupo 3.5in Long 5/8in Baby Stud with 1/4in-20 Male
- The Kupo 3.5" Long 5/8" Baby Stud w/ 1/4"-20M holds a small light monitor or can be used to mount anything that has a 1/4"-20 female thread. It can be used with a grip head on its own. It can be used with a grip head and grip arm combination for mounting options almost anywhere. It can be inserted into…
- Read more
-
- Accessories, Adapters
Kupo 3.5in Long 5/8in Baby Stud with 3/8in-16 Male Thread
- The Kupo 3.5" Long 5/8" Baby Stud w/ 3/8"-16M holds a small light monitor or can be used to mount anything that has a 3/8"-16 female thread. It can be used with a grip head on its own. It can be used with a grip head and grip arm combination for mounting options almost anywhere. It can be inserted into…
- Read more
-
- Accessories, Adapters
Kupo 3/8in-16 Male to 1/4in-20 Female Adapter
- This is a small adapter that converts a 3/8"-16 male thread to a 1/4"-20 female thread. It is made from brass. Converts a 1/4"-20 female thread into a 3/8"-16 male thread. Solid brass Great for size conversions on set Inexpensive and lightweight
- Read more
