-
- Accessories, Adapters, Screws & Nuts
Kupo 1/4in-20 D-Ring Screws (Set of 5)
- The Kupo 1/4"-20 D-Ring Screws (Set of 5) is made with stainless steel. It can be hand tightened using the hinged D-ring or by using a screw driver. It's great for quick-release plates. The shaft is 10mm long in total. Ideal for quick-release plates or any 1/4"-20 thread compatible device. Hand tighten using the hinged D-ring or by using a…
- Read more
-
- Accessories, Adapters
Kupo 1/4in-20 Male to 1/4in-20 Male Thread Adapter
- This is a small adapter that converts a 1/4"-20 female thread into a 1/4"-20 male thread. Dual male stud with standard 1/4” 20 tripod thread. Converts a 1/4"-20 female thread into a 1/4"-20 male thread Handy to attach two female devices to each other with the adapter inbetween them
- Read more
-
- Accessories, Adapters
Kupo 1in Conversion Adapter 1/4in-20 Female to 1/4in-20 Male (Set of 5)
- Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5). Convert any 1/4"-20 receiver to a male 1/4"-20 stud. It is 25.4mm long. Tightens securely into place using an allen key or hex key. Mount spigots tripod heads or anything with 1/4"-20 receiver in difficult places. Convert any 1/4'-20 receiver to a male 1/4"20 stud. Tightens securely into place using…
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M10 Screw and Washer
- A solid steel 28mm TV spigot tapped for an M10 screw with washer. Ideal for mounting lighting fixtures directly on stands with a 28mm receiver. Chrome plated. Ideal for mounting lighting fixtures directly on stands or any TV clamps with 28mm receiver 28mm steel spigot M10 Hex screw with washer Length: 4.9 inches (125.3mm) Additional hole for safety pin
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M10 Thread
- A 28mm steel spigot with M10 thread and wing nut. Allows the spigot to be attached to a lighting yoke then fits into a standard lighting stand with a 28mm receiver. Allows the spigot to be attached to a lighting yoke 28mm steel spigot M10 thread with wing nut Length: 5.5 inches (139.9mm) Chrome plated
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with M12 Thread
- A 28mm steel spigot with M12 thread and wing nut. Allows the spigot to be attached to a lighting yoke then fits into a standard lighting stand with a 28mm receiver. Allows the spigot to be attached to a lighting yoke 28mm steel spigot M12 thread with wing nut Length: 5.5 inches (139.9mm) Chrome plated
- Read more
-
- Accessories, Adapters
Kupo 28mm Steel Spigot with Round Plate and M10 Thread
- A 28mm steel spigot with a 12cm round mounting plate. Fits into a standard lighting stand or it can convert a 28mm receiver to an M10 thread with wing nut. Chrome plated. Fits into standard lighting stands or it can convert a 28mm receiver to an M10 thread with wing nut 28mm steel spigot M10 thread with wing nut Length:…
- Read more
-
- Accessories, Adapters
Kupo 3-Way Mount Baby Adapter 5/8″ Receiver to 3/8″-16 Male
- The Kupo 3-Way Mount Baby Adapter is a versatile steel adapter with a black coating designed to securely mount a flash, light, or camera with 3/8"-16 female threads onto a 5/8" (16mm) light stand. The locking adapter allows for both vertical and horizontal mounting options. In addition, it features an oblique hole design, providing an additional 35-degree tilt to eliminate…
- Read more
-
- Accessories, Adapters
Kupo 3.5″ Extra Long 5/8″ Baby Stud with 3/8”-16 Male Thread
- This adapter is a 3.5” long 5/8” baby stud with 3/8”-16 male thread 25.4mm in length. It can be used with a grip head or convi clamp and attached to any accessory with female 3/8" threads, such as an articulating arm. In addition, the male threads can be mounted to a clamp or another piece of grip gear, while the…
- Read more
-
- Accessories, Adapters
Kupo 3.5in Long 5/8in Baby Stud with 1/4in-20 Male
- The Kupo 3.5" Long 5/8" Baby Stud w/ 1/4"-20M holds a small light monitor or can be used to mount anything that has a 1/4"-20 female thread. It can be used with a grip head on its own. It can be used with a grip head and grip arm combination for mounting options almost anywhere. It can be inserted into…
- Read more
-
- Accessories, Adapters
Kupo 3.5in Long 5/8in Baby Stud with 3/8in-16 Male Thread
- The Kupo 3.5" Long 5/8" Baby Stud w/ 3/8"-16M holds a small light monitor or can be used to mount anything that has a 3/8"-16 female thread. It can be used with a grip head on its own. It can be used with a grip head and grip arm combination for mounting options almost anywhere. It can be inserted into…
- Read more
-
- Accessories, Adapters
Kupo 3/8in-16 Male to 1/4in-20 Female Adapter
- This is a small adapter that converts a 3/8"-16 male thread to a 1/4"-20 female thread. It is made from brass. Converts a 1/4"-20 female thread into a 3/8"-16 male thread. Solid brass Great for size conversions on set Inexpensive and lightweight
- Read more
-
- Accessories, Adapters
Kupo 3/8in-16 Male to 1/4in-20 Male Thread Adapter
- This is a small adapter that converts a 3/8"-16 female thread into a 1/4"-20 male thread. Dual male stud with 3/8’’ to 1/4’’ thread adapter Converts a 3/8"-16" female thread into a 1/4"-20 male thread Handy to attach two female devices to each other with the adapter inbetween them
- Read more
-
- Accessories, Adapters
Kupo 5/8” Adapter For 3/8” Female to 3/8” Male
- This aluminum 5/8’’ (16mm) adapter, is 2.7 inches (70mm) in length, and has 3/8”-16 female threads in one end and one 3/8’’-16 male to 3/8’’-16 male adapter on the other end. Great for connecting to any equipment that comes with 5/8’’ (16mm) receiver, 3/8’’-16 threaded male or 3/8’’-16 thread female. Connect to equipment with 5/8’’ (16mm) receiver, 3/8’’-16 threaded male…
- Read more
-
- Accessories, Adapters
Kupo 5/8” Stud with 3/8”-16 Female Thread
- This 3.5” long 5/8” baby stud has a 3/8"-16 female thread which is designed to mount a stud on a tripod, suction cup or anything with a 3/8”-16 thread. 3.5” long 5/8” baby stud with 3/8”-16 female thread Designed to mount a stud on a tripod, suction cups, or anything with 3/8"-16 thread Knurled neck Lightweight aluminum Length: 3.5in (90mm)
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Male Adapter (3/8in)
- Steel Made 5/8" (16mm) Adapter with 3/8’’-16 thread female. 5/8" (16mm) pin 3/8" -16 female thread at the end Knurled neck for maximum friction Steel made
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Male Adapter (M10)
- Steel Made 5/8" (16mm) Adapter with tapped M10 thread female. 5/8"(16mm) Stud Chrome plated Steel M10 Thread Female Length: 2.00" / 51.0mm
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Receiver with 1/4in-20 Thread
- This adapter consists of a baby receiver with a 1/4"-20 male thread attached to the top of it that can be mounted on any baby stud with a set-screw and knob to lock it firmly in place. It can be used to quickly mount a hot shoe flash with a Hot Shoe Adapter (KG006711), or a field monitor onto the…
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Receiver with 3/8in-16 Thread
- This adapter consists of a baby receiver with a 3/8"-16 male thread attached to the top of it that can be mounted on any baby stud with a set-screw and knob to lock it firmly in place. It can be used to quickly mount a hot shoe flash with a Hot Shoe Adapter (KG006711), or a field monitor onto the…
- Read more
-
- Accessories, Adapters
Kupo 5/8in (16mm) Stud with 1/4in-20 Female
- This is a small adapter that converts a 1/4"-20 male thread into a 5/8" Baby Stud. 5/8’’ baby stud with 1/4’’- 20 female thread Designed to mount a stud on a tripod or anything with a 1/4” - 20 thread. Converts a 1/4"-20 male thread into a 5/8" Baby Stud Inexpensive and lightweight Length: 3.5" (88.9mm) long
- Read more
-
- Accessories, Adapters
KUPO Adapter For Thread 3/8”-16 To 1/4”-20 (Set of 5)
- Used to mount any accessory with a female 3/8"-16 threaded socket onto a 1/4"-20 male screw. (set of 5) Constructed from Steel Designed to Mount any Accessory with a Female 3/8”- 16 Threaded Socket onto a 1/4”- 20 Male Screw. Set of 5
- Read more
-
- Accessories, Adapters
Kupo Adapter Stud to 3/8in-16 Thread
- This is an adapter for the Convi Clamp System. It is a solid brass round 5/8" adapter stud with 3/8''-16M. Solid brass adapter 5/8"'' adapter stud with 3/8''-16M. Knurled pin
- Read more
-
- Accessories, Adapters
KUPO Adjustable Cold Shoe Mount
- The Kupo Hot Shoe Adapter is an all-metal micro clamp designed specifically for off-camera flashes. It comes equipped with a variable tension knob that locks securely around any flashes foot for a snug fit. The bottom of the adapter is tapped with a 1/4"-20 thread for easy mounting. With the popularity of off-camera TTL this little accessory will give you…
- Read more
-
- Accessories, Adapters
Kupo Baby Ball Head Adapter
- Since most grip gear and lighting equipment uses a baby 5/8"(16mm) spigot or a junior mount 28mm (1-1/8) receiver, this accessory adds extra versatility to your gear. Complete with 3 set screws to securely lock the head. Base diameter size is 44mm. The compact size and lightweight aluminum makes it ideal for traveling
- Read more
-
- Accessories, Adapters, Stand Accessories
Kupo Baby Drop Ceiling Adapter 5/8in (16mm) Stud
- The drop ceiling mount (also commonly called a scissor mount) attaches to an intersection in the metal grid that supports the tiles. This adapter is perfect for trying to find a suitable mounting point on drop ceilings. A must have accessory for shooting in office buildings. This is the male version of this adapter and features a 5/8" baby stud…
- Read more
-
- Accessories, Adapters
Kupo Bagua Multi Flash Bracket
- The Kupo Bagua Multi-Flash bracket is a palm sized, lightweight, black anodized, 6061 aluminum bracket with eight speedlight mounting locations. The bracket will accommodate four speedlights on it's own or up to eight speedlights with some optional Extension Flash Adapter Set. Up to eight flashes with Extension Flash Adapters or four without. Dual umbrella holes Four softbox rod holes 1/4"-20…
- Read more
-
- Accessories, Adapters
Kupo Ball Race Followspot Spigot with M10 Thread
- Use this 28mm rotating spigot to make a lighting fixture into a followspot. Smooth panning action is assured by roller bearings which allows the user to pan gently without sudden movements when moving a spotlight. A locking knob controls the position. The 28mm spigot also comes with an M10 screw attached Used to make a lighting fixture into a followspot…
- Read more
-
- Accessories, Adapters
Kupo Ball Race Followspot Spigot with M12 Thread
- Use this 28mm rotating spigot to make a lighting fixture into a followspot. Smooth panning action is assured by roller bearings which allows the user to pan gently without sudden movements when moving a spotlight. A locking knob controls the position and this rotating 28mm spigot also comes with an M12 screw attached. Used to make a lighting fixture into…
- Read more
-
- Accessories, Adapters
Kupo Bracket for Vagabond Mini Lithium Portable Power Pack
- The Kupo Bracket for Vagabond Mini Lithium Portable Power Pack is an excellent solution for holding and mounting a Vagabond mini portable power pack. The welded hex stud is designed to fit into a Convi Clamp receiver or with a Kupo 3 way and 4 way clamp. You can mount the Vagabond with a single 1/4"-20 screw to the bracket.…
- Read more
-
- Accessories, Adapters
Kupo Double Baby Receiver Adapter
- This adapter allows you to join two baby studs together. Includes 5/8" (16 mm) receiver. Made of chrome plated steel. 5/8" (16mm) Receiver Chrome plated steel Joins two baby studs together
- Read more
-
- Accessories, Adapters
Kupo Double Female Adapter – 5/8”
- This is an aluminum female to female adapter that is used to convert a 5/8" male light stand top to a 17mm female socket. It can also be used to make a 17mm female attachment from a 16mm spigot. Converts 5/8" male light stand top to a 17mm female socket Female adapter 16mm-17mm Made of lightweight aluminum Makes a 17mm…
- Read more
-
- Accessories, Adapters
Kupo Elinchrom Adapter 5/8in Female to 5/8in Male
- Spigots on C-Stands booms and various other stands have different lengths causing some heads not to be seated securely. Kupo's adapter for Elinchrom addresses this concern by helping to create a more secure locking mount when placed on stands with different length spigots. 5/8" F Receiver to 5/8"M Stud for Elinchrom Lights Can Position the light horizontally or vertically Knurled…
- Read more
-
- Accessories, Adapters
Kupo Heavy Duty 3/8″-16 male to TVMP Swivel Adapter
- Born from the Super Grip family, the Kupo Heavy-Duty 3/8"-16 Male to TVMP Swivel Adapter provides a male 3/8"-16 thread on top and features a TVMP adapter on the bottom. It boasts a 38mm metal ball head and a large handle allowing for quick and secure adjustment of equipment in any direction on a stand, boom arm, or other types…
- Read more
-
- Accessories, Adapters
Kupo Hex Adapter
- The Hex Adapter is made of solid brass with 5/8"’’ hex adapter with 3/8’’-16 female thread and 1/4’’-20 male thread. The hex-end design prevents unexpected rotation. Adapter for the Convi Clamp Hex-end design prevents unexpected rotation 3/8" - 16 female thread and 1/4"-20 male thread Solid Brass
- Read more
-
- Accessories, Adapters
Kupo Hot Shoe Adapter 3/8”- 1/4” with Barrel Adapter
- This adapter can fit on the hot shoe of most cameras. It has a 3/8’’ to 1/4’’ threaded stud and is used as a Monitor Bracket or anything else that has a 1/4’’-20 receiver. Two large knurled locking nuts are equipped for easy tension adjustment. It comes with a 1/4’’-20 double female barrel adapter as the standard accessory and a…
- Read more
-
- Accessories, Adapters
Kupo Junior Multi Header
- The Junior Multi-Header is a solid steel square tube, 40 inches (100cm) length with anti-reflection black coating. Five junior receivers are welded to the header for a maximum of five lighting fixtures. The header is attached with a junior stud (28mm) for a universal stand top or any mounting accessories that come with a junior socket. Max loading weight is…
- Read more
-
- Accessories, Adapters
Kupo Male Adapter Stud 5/8in with 3/8in-16 Female
- The Kupo Male Adapter Stud 5/8" w/3/8"-16F easily converts a male 3/8"-16 to a 5/8" baby with a 1/4"-20 thread (Standard Stand Top). It can be used when you to want a baby pin mount on a tripod. It works well with Convi and Super Claw Clamps. It can place a baby spigot on top of numerous items like suction…
- Read more
-
- Accessories, Adapters
Kupo Metal Quick Release GoPro Tripod Mount
- The Kupo Metal Quick Release GoPro Tripod Mount is Arca Swiss compatible to mount on any head with an Arca Swiss mount. It is made from lightweight aluminum for extra durability. It has 1/4"-20 mount for mounting on any stand with a 1/4"-20 thread. The 3 additional holes provide a number of mounting options like mounting onto wood. Arca Swiss…
- Read more
-
- Accessories, Adapters
Kupo Microphone Screw Adapter – 3/8in Female to 5/8in-27 Male
- Kupo Microphone Screw Adapter is ideal for placing 3/8"F to 5/8"-27M microphone mounts onto lighting stands or tripods with a 3/8"-16 male thread. Useful adapter for putting microphone mounts on to light stands. Mount to any device with 3/8"-16 male thread. Convert any stand or device from 5/8"-27F to a 3/8"-16M thread.
- Read more
-
- Accessories, Adapters
Kupo Quick Release Adapter Set – 1/4in-20
- The aluminum built portion bottom with a 1/4''-20 female thread can be securely attached to any lighting or video accessory that comes with 1/4''-20 male stud. Adapter allows easy switching between the 4 different Kupo Top Mounts. Easy and quick to attach or remove the top mount by just pushing the release red collar down. Ideal for mounting monitors lights…
- Read more
-
- Accessories, Adapters
Kupo Quick Release Adapter with 1/4in-20 Male
- This adapter allows for easy switching of different top mounts. To make additional quick changes to your equipment configuration you can use the 1/4"-20M thread at the bottom. Designed to work currently with 4 different Kupo top mounts. The hexagonal shaped receiver securely engages Kupo Quick Release Adapter Male top mounts providing easy connection of accessories that go around your…
- Read more
-
- Accessories, Adapters, Arms, Camera Support, Grip, Max and Vision Arms, Other Accessories
Kupo Quick Release Camera Plate
- The Kupo Quick Release Camera Plate is easy to set up and offers the ability to quickly move from a tripod to hand held photography. A secondary safety lock prevent the quick release plate from inadvertently opening. Features a standard 3/8"-16 thread and a 1/4"-20 reducer bushing making this quick-release camera plate compatible with flash brackets, tripods, light stands, and…
- Read more
-
- Accessories, Adapters
Kupo Quick Release Male Top Mount Baby Stud 5/8in with 1/4in-20 Male Thread
- Easy and quick to attach or remove the top mount by just pushing the release red collar down on the Quick Release Adapters. Allows for mounting any light with a 5/8" baby mount or by using the 1/4"-20 threads on the top of the stud. Top mounts can easily be swapped out while working with the 2 different quick release…
- Read more
-
- Accessories, Adapters
Kupo Round Knurled Flange Disc 1.77in with 1/4in-20 Female
- The Kupo Round Knurled Flange Disc 1.77" with 1/4"-20F is typically found on suction cups for helping to lock items securely into place. It is made of quality light-weight aluminum and can be used on anything with a 1/4"-20 Male threaded shaft. Typically found on suction cups for helping to lock items securely into place. Use on anything with a1/4"-20…
- Read more
-
- Accessories, Adapters
Kupo Round Plate (59mm) with 3/8in-16 Female Thread
- Made of lightweight aluminum, the 59mm diameter round plate can be used on anything with a 3/8”-16 male thread. Features three set screws to securely lock equipment and keep from rotating. Works on anything with a 3/8"-16 male thread Plate diameter size is 2.3" /59mm Features 3 locking set screws to securely lock equipment Made from lightweight aluminum
- Read more
-
- Accessories, Adapters, Camera Support, Grip
Kupo Swiveling Adapter w/Quick Release Camera Mounting Plate
- Kupo Swiveling Adapter w/Quick Release Camera Mounting Plate-Camera plate has standard 1/4"-20 Camera screw Remotely mount cameras almost anywhere. Use swivel adapter in conjunction with clamps stands and suction cups. Quick Release camera plate to mount and unmount cameras easily Double Ball Joint to allows for ease of positioning Ratcheted handle to provide locking power when needed
- Read more
-
- Accessories, Adapters
Kupo Tilting Umbrella Adapter with 5/8in Studs
- This adapter enables you to use an umbrella with light fixtures that don't have a place to accept an umbrella shaft. Reversible 5/8" (16m) studs accompany this adapter. It has (KG000912) 1/4"-20 , 3/8"-16 male threads on either side and the round stud (KG001112) is tapped with 1/4"-20, 3/8"-16 female threads on either side. Removable and reversible 5/8’’studs with 1/4"-20…
- Read more
-
- Accessories, Adapters
Kupo Triway Baby Adapter
- The Kupo Triway Baby Adapter is your go-to tool for expanding mounting possibilities on set. With four solid chromed steel 5/8" (16mm) baby pins, it lets you mount multiple lights or accessories on a single stand - quickly, securely, and efficiently. Designed for real-world flexibility, the 3.54” (9cm) baby pin is perfect for use with grip heads, while the 2.36”…
- Read more
-
- Accessories, Adapters
Kupo TVMP Adapter (TV to Motion Picture)
- This solid steel adapter has a junior 1-1/8" (28mm) outer diameter and a baby 5/8" (16mm) interior receiver. This adapter has a set-screw with a knob to secure it to any baby pin or accessory. On the top of the adapter there is a bolt that secures it to the yoke of a lighting fixture for easy mounting into a…
- Read more
-
- Accessories, Adapters
KUPO Umbrella Swivel Bracket
- Umbrella swivel bracket is made of aluminum with 5/8”(16mm) receiver in both ends that can connect to stands or accessories with a baby pin to make aiming the light or flash easy with the swivel design. The locking umbrella socket also accepts umbrella shafts up to 3/8” diameter. Constructed from Black Powder Coated Aluminum 5/8”(16mm) Receiver in Both Ends T…
- Read more
-
- Accessories, Adapters, Arri Supports & Mounting Solutions, Grip
Kupo Vision Lock W/ Arri Style 3/8In-16 Spacer
- The same function as the Vision Lock Quick Release Mounting Set (KG046212), this quick release mounting set is ideal for connecting an LCD monitor to the articulating Rock’s Arm or Vision Arm. This lock comes with an Arri Style 3/8in-16 Spacer that allows fitting for an ARRI-style 3/8in-16 anti-twist accessory mount with an included 3/8in-16 screw. This quick-release mounting set…
- Read more
